How to Make Snow Balls with Buffalo Snow

3 Comments

The spirit of holiday decorating has hit me early this year.  This is the first time ever I have both Thanksgiving and Christmas decorations up at the same time. Part of this was due to the weather being relatively comfortable the past few weeks, except for yesterday, which was very cold and windy.  Putting outdoor lights up on a warm and sunny day is much more pleasant, so I did that before this cold hit us.

And of course, the other reason I started decorating early is because of my upcoming Cathy T Class on December 7th (you know which one).  Plus Thanksgiving is a little later this year, so time will be limited right after, at least for me, to get decorating tasks done.

So this weekend’s project was creating snowballs with Buffalo Snow.  It was easy and fun to do, and here are the items you will need if you would like to give this a try:

  1. Glue gun with glue sticks
  2. 3-4″ wooden green florist picks with wired ends
  3. Buffalo Snow (sold in craft stores in bags)
  4. Styrofoam balls (various sizes)
  5. 4″ zip ties (cable ties)

First step is inserting the florist pick through the center of your Styrofoam ball.  I used a 1″ ball for my first project. After it is inserted, bend the wire end of the pick to form a hook to be used as your attachment later to whatever item you wish to put the snowball on.  In my case, it was attached to a grapevine snowman’s hand.

snowballs_0001

Get your glue gun warmed up.  I always set my glue gun into an aluminum tray because it drips when it is hot.  At first, I applied the glue to the ball, but once that glue gets really hot, it can actually melt the ball somewhat, so later, I started applying the glue to individual pieces of Buffalo Snow. (See below).

IMG_1676

It helps to have small portions of the Buffalo Snow ready on the table as you keep adding pieces of it to your ball.

snowballs_0002

After the ball is completely covered, I was puffing and patting it.  It reminded me of making meatballs.  Where you have the ball in your hands and roll it, but instead of rolling, I was shaping it with just pats and pulls here and there until I felt it had a nice shape.

snowballs_0006

After I had the ball done, I put it on my snowman using the wire and a zip tie to attach it to the hand of my snowman.  After I was done, another crafty idea hit me. Why not create a few different sizes of these snowballs or puffs to hang from the ceiling?

snowballs_0005

So that was project #2:

  1. 3 balls or 5 balls of various sizes.  The largest in the photos is a 5″ ball, smallest is 1″.
  2. Same materials as above (glue gun, sticks, florist pick with wire, buffalo snow)
  3. 12″ lengths of chenille pipe cleaners (as hangers, or you could use ribbon or decorative string too)

snowballs_0007

Again, I got my pieces of Buffalo Snow set aside.  First insert the florist pick into the center of the ball.  Start attaching the pieces until the ball is completely covered.  Pat, puff, and pull here and there until you feel the ball is the right shape or fluffed look.  Be sure to play a holiday CD while crafting – it makes it more magical!

IMG_1679

Attach the chenille pipe cleaners to the wired end.  Connect the pipe cleaners to form different lengths to hang the balls from the ceiling in a staggered pattern.  After I completed three different size balls, I decided to hang them.

IMG_1682

They looked rather “Whoville’ish” because of their whimsical nature and the candy cane pipe cleaners.  At this point, I decided 3 was good enough, and didn’t do the other two.  However, this set the tone of the rest of my decorations in this room.  Part of why I love to do some crafting during the holidays especially.  As you work and play, the ideas start to pop into your head!

IMG_1685

Hope you will have some time during or after Thanksgiving to get your craft juices going too.

Cathy Testa

P.S.  I know the balls aren’t “perfect” but I’m not Martha Stewart either.  😉

Three Easy Ways to Use Mesh Ribbon for Holiday Decorating

8 Comments

Project No. 1: Grape Vine Wreath with Mesh Ribbon and Decor

This is super easy to do, and no glue gun is required!  Select mesh ribbon (or Ruban en maille in French) with the colors you like and just make sure your decor colors work well with your ribbon choice.  This project can be done in less than an hour easily.

Here is what you will need:

  1. One grape vine wreath (20″ size was used)
  2. 4″ and 8″ green zip ties (a.k.a, cable ties)
  3. Roll of Mesh Ribbon (20.5″ width was used).  Length is dependent on how big you want to make the puffs.
  4. Your choice of matching ornaments (holiday balls, florist picks, etc.)
  5. One large tin decor (snowman face with hat used)
  6. Sharp scissors or snips

Mesh Ribbon Projects_0002

First step is gathering the end of your ribbon and attaching it to the wreath.  Zip ties work extremely well for this. They are strong, easy to connect, and durable.

Mesh Ribbon Projects_0001

Once you have your starting end attached to the wreath and secured tightly by pulling the zip tie closed (left above photo), determine how big you want your puffs to be.  You will be gathering the ribbon at the next interval (right above photo), and how much you space each interval is dependent on how big you want that puff to be, or you can place your zip ties at even intervals/spacing first so you can judge before you start attaching the next puff.

Mesh Ribbon Projects_0003

NOTE:  For the interval places you will attach the ribbon, be sure you do not pull the zip ties completely tight at each interval as you pinch and attach.  Leave a little slack because at each interval, you will attach your decor items (so you need some gap or space at the zip tie to attach the decor items after you are done.)

Move to your next gathering location.  Gather and pinch the mesh ribbon at the next spot, and attach with the zip tie (loosely closed).  It helps if you insert the zip tie first at your next position, so it is ready for you.  You may also want insert the zip ties before you start attaching the ribbon at intervals to estimate the spacing so it is at equal intervals for each puff you will make on the wreath.

At the last tie, leave a long strip of the mesh ribbon to serve as your tail ends.  Using the scissors, cut it in half length wise, so you have two tails.  The length of the tails is up to you.

Mesh Ribbon Projects_0005

Now it is time to attach your decor.  Florist picks, decor with stick ends, and regular holiday ornaments are easy to secure.  Grab another zip tie, and slide it through the ball hook end, then attach it at the intervals to the zip ties used to secure the ribbon.

Mesh Ribbon Projects_0004

Position a large focal point element where you feel it is well balanced and easily secured.  In this case, a snowman with hat was used.  The hat tip had a hook on it so it was super easy to use the zip tie (my favorite attaching mechanism!) to the top end of the wreath.  At the base of the tin, luckily the back had a little hook too.  (P.S. Holiday tins and decor shown in these projects are available at my December 7th Evergreen Kissing Ball and Holiday Creations class!)

Mesh Ribbon Projects_0008

After you have all the ornaments on and other decor, go around to pull each of the zip ties tightly closed to get everything secured.  Snip off the tail ends of zip ties that are sticking out.

NOTE: The florist picks with a shiny silver gold flakes and the red leaves were very easy to insert because of their wired ends. Just tuck them in and secure with the wired end. Or just stick in the pick end (like on the snowflake) into the grape vine wreath.  

The grape vine wreath base works great for this project, but you could use other types of wreath frames.

Mesh Ribbon Projects_0007

Hang on your door and enjoy!

Mesh Ribbon Projects_0009

Project No. 2: Big Ball Bunch with Mesh Ribbon

This is something I did last year, but this year, I decided to try it out with the mesh ribbon.  I love hanging this ball bunch from an overhead light fixture at my entrance.

Items need:

  1. Large weather resistant holiday balls
  2. 4″ and 8″ zip ties (a.k.a., cable ties)
  3. Mesh ribbon (20.5″ width used)

Mesh Ribbon Projects_0011

The first step is connecting all the balls together.  Zip ties are awesome for this (gotta love those zip ties!!).  Run a tie through each end of the individual balls and then attach them together with a central zip tie.  You may want to hang them somewhere after to access if you like the look of how the balls are positioned before you attach the mesh ribbon.  The balls are gathered together but not super tightly because you need those gaps and wide open areas of the ties to pull through the mesh ribbon in your next step.

Mesh Ribbon Projects_0010

Cut a length the ribbon to get started.  It is difficult to judge how long you want that length to be cause you will be tucking and inserting it into the zip tie between the big balls based on the look and size you desire.  I started with like a 4 ft length, and cut more later as I worked.

Mesh Ribbon Projects_0012

Gather the starting end of the mesh ribbon and tighten the top of one of the zip ties to secure the starting point. Once secured, move a few inches down to the next gathering point.  Again, how many inches is up to you – how big do you want that puff to be. Once you know, pinch and gather, and use a zip tie around that point to secure the pinched area (top right photo). And then from that point, bunch up your next gathering point on the ribbon with a zip tie and pull it through another zip tie that is on a ball.  Repeat the process, and tuck and pull the ribbon around the balls to form the look desired.  Leave a tail end to hang from the base to cut in half length wise when done.

Mesh Ribbon Projects_0013

When all completed, remember to add a zip tie to hang the whole bunch from.  Here it is shown hung on an overhead light structure.  I wish I could have taken a better photo, because the cast of the shade was making the photo dark – but in the sunshine, this big bunch of balls with beautiful mesh ribbon is so sparkly.  I just love it!  And it is so easy to assemble.  This project took only about 30 minutes or so.  Very easy.

Mesh Ribbon Projects_0014

Project No 3: Urns with Big Red Ball and Mesh Ribbon

So since I was on a roll, I thought I would dress up my two urns outside.  Again, super easy with the mesh ribbon.

Items needed:

  1. Container of your choice, filled with soil
  2. Stakes (bamboo pole used)
  3. Loppers to cut bamboo stake
  4. Big Holiday Ball (needs to have an open end or hole)
  5. 4″ and 8″ zip ties (a.k.a., cable ties)
  6. Mesh Ribbon (20.5″ width used)
  7. Wire (ends of coat hanger wire used)

Mesh Ribbon Projects_0017

Step one is cutting the bamboo stake to the desired equal lengths.  Insert the stake into the soil.  Position it in the center.

Mesh Ribbon Projects_0015

Attach the beginning end of the mesh ribbon to the stake with a zip tie tightly closed so it is secured to the bamboo stake.  Then wrap the ribbon around the pole to create another “puff”. Keep repeating attaching each puff to the center stake/pole.  After you have your puffs in place, use the wire to push the mesh down in the center so it is level. You can bend the wire into a U shape to do this.

Mesh Ribbon Projects_0016

Insert the ball to the top of the stake end.  Later, I plan to add live evergreen cuttings and tips.  It’s got a thriller or focal point (the ball), a filler (the mesh ribbon), but it still need something else to spill around it, which will be the live evergreen cuttings later.

Mesh Ribbon Projects_0018

Mesh ribbon is so incredibly easy to use.  It beats struggling with regular ribbon and it creates such a nice large and showy display.  You can make the puffs as large or small as you like.  There are endless uses for mesh ribbon during the holidays.

And if you select a mesh ribbon with a little sparkle, it will shine in the sun too.  My recommendation is you get a roll at least 10 yards long – you will use it – believe me – because it is so much fun meshing around.  For these three projects, I used approximately 15 yards of ribbon total.

Mesh Ribbon Projects_0019

Written by Cathy Testa

Great Hooks to Hang Kissing Balls for the Holidays

Leave a comment

Class Attendees – This one is for you – Just a quick Post.  I saw these plant hanger hooks at Home Depot in Enfield on Friday.  They make wonderful hooks for kissing balls during the holidays if you don’t have a hook already.

Just wanted to share with you because the price was wonderful – they are on sale.

Look in the garden center section for them – only a few were remaining.

Kissing Ball Hooks_0008

Kissing Ball Hooks_0007

Thanks – Cathy Testa

Winter Gardening Fun – From Making Kissing Balls to Evergreen Holiday Creations!

4 Comments

It is only four more weeks until Cathy T’s 4th annual Evergreen Kissing Ball and Holiday Creations Class.

Photo Creation via Bitstrips

Photo Creation via Bitstrips

At this class, you have the option to make either an Evergreen Kissing Ball (hung outdoors during the holidays), wreath, mailbox swag, or candle centerpiece.  The class gets filled with a group of wonderful attendees ready to have some holiday crafting fun before the shopping and other preps begin this year.

This is a great way to dress up your outdoors with some fresh greenery and add some decorating features during the winter! Yes, nothing is prettier than snow on beautiful evergreen creations.  When birds stop by to visit, it is even prettier.  And when you have holiday guests over, and they step outside for some fresh air, they will have something very pretty to admire – made by you.

Photo by Cathy Testa

Photo by Cathy Testa

It may not be Thanksgiving yet, but I’m already excited for the holidays – because of this annual event.  Nothing is nicer than the smell of fresh fragrant evergreens in your surroundings, knowing you created it, and you got it done early so you can enjoy it for the entire month of December and up through after the holidays – evergreens outdoors last well into early February.

There are only a few more seats remaining, so if you are local to my area (East Windsor/Broad Brook, CT), and are interested, please sign up soon.

Evergreen Kissing Balls by C Testa

See more information HERE or contact Cathy Testa at containercathy@gmail.com.

Thank you,

Cathy Testa

Unique Wreaths capture a Native and Organic style

1 Comment

And they are the creations of Mauli McDonald of ‘art and nature’ out of New London, NH.

Art of Nature_0001

A visit to a fine arts festival at Roseland Cottage situated in the heart of Woodstock, Connecticut makes for a pleasant afternoon.  The grounds of this 1846 home, a national historic landmark, is filled from corner to corner with 175 artisans and their wares, from jewelry to pottery and more for two days every October.

As I toured the artisans’ booths this year, on October 19th, I did not bother much to take out my camera as usual.  For some reason, I wasn’t in the picture taking mood, but I was admiring many of the art works showcased and being offered for sale by the participants.  I picked up a few holiday themed ornaments, a really nice pottery piece, and enjoyed a lunch as I chatted with a group at a table filled with visitors from all around New England.

But one artisan that day struck me in particular – and it was the works by Mauli McDonald of ‘art of nature’ from New London, NH.  She had beautiful organic wreaths and center pieces.  Even her business card connected with me.  It was created on torn edged paper with a real feather pasted on the center below her business name.

Images property of Mauli McDonald

Images property of Mauli McDonald

Mauli’s words provide the perfect explanation, as presented on her website, of her art form:

“The materials that I have chosen to work with have in some way enchanted me.  The soft edge of a feather, the curve and cradle of an antler, the green pool moss on a white wintered log—each object speaks.  And as you will discover, many of the designs carry, as well, a native, organic, almost unsophisticated style.”

As I looked over her unique wreaths created with native and organic materials that day, I was in awe of how she assembled the textures, colors, and overall feel.  She definitely has talent – and when you see her pieces in person, you witness her ability to capture materials from the forest floors in well-balanced compositions.

But more importantly, the objects she uses are organic, natural and make one think of things in nature which she so beautifully captured in an art form.  As you look and admire them, many may bring you memories of scenes in nature you have experienced in your own walks through parks, forests, or even in your own backyard.

As I browsed along her website later, I spotted her ‘antique art’ pieces where a violin or snowshoe was used in combination with treasures from nature.  How wonderful these pieces are because they capture a keepsakes and combine it with nature’s treasures.

Images property of Mauli McDonald

Images property of Mauli McDonald

As Mauli McDonald states,

“I am drawn to certain thing simply because I like the object.  A singular piece may have no function, but there is something about it that I find appealing.”

I totally get that statement. Being ‘drawn to something’ because it has a particular connection or appeal.  Like the violin, for example, made me think of my father who plays one.  And the snowshoe is one of my hobbies in winter.  But the way this artist assembles theses treasures with nature is truly beautiful.  It pays homage to both objects – the treasures found in life and given by nature to us every day.

Mauli McDonald’s works are wonderful examples of “combining nature with art” and I wanted to share them with you. Take the time to visit Mauli McDonald’s website at www.natureswildart.com and if you should happen to be traveling in New Hampshire, I suspect a visit to her beautiful shop would be worthwhile.  Just look at the entrance!

Image property of Mauli McDonald

Image property of Mauli McDonald

It is located at 9 Newport Road, New London, NH 03257.  To reach Mauli, email to urth@tds.net or call 603-526-2638.

For more information regarding the Roseland Cottage Fine Arts and Crafts Festival, visit HistoricNewEngland.org/Festivals.

Written by Cathy Testa

P.S. Tips when you visit Roseland Cottage for their next annual show, just enjoy – everything is there for you, parking is in lots across the street, some on lawn areas, lunch is available as there are many choices by the food vendors, live music is playing too.  I would say the only tip is to note this event on your calendar so you don’t miss it next year.

The FIVE MUST DO’s for Successful Container Gardening

4 Comments
Images courtesy of FreeDigitalImages.net.

Images courtesy of FreeDigitalImages.net. (top left to right: Zirconicusso, Criminalatt, and Marin.  Bottom: James Barker and Simon Howden photographers)

A new page has been added to this blog where I share with you The Five Must Do’s for successful container gardening.

In all my container gardening talks, I go over every one of them and why they are so important – but now you can read them HERE on my blog.

You will find if you do all five, your container gardens will thrive, look amazing, and make you extremely happy.

So often, people will skip one or more of the steps, and they wonder why their plants are not doing well or growing poorly.  Once they follow my 5 MUST Do’s, they never look back again because their plants will thrive and grow so well.  Doing The 5 MUST Do’s is – well, a must!

Hope you enjoy the new page, accessible from my top menu bar under CONTAINER GARDENS.

Stay tune too – more tips are on the way.

Thank you,

Cathy Testa

New Page: Container Garden Pot Types

Leave a comment
Photos by Cathy Testa

Photos by Cathy Testa

Do you ever wonder if a particular type of container garden pot is worth the investment or how it helps or harms the growth and habit of your plants?  On this new page, I share my experience based on my use of various pots over the years.  See Container Garden Pot Types listed under the Container Gardens page on the top of this blog.

You will find terra-cotta, wood, concrete, and more listed and posted routinely.  There are so many choices and the options are limitless. Containers are the shoes to your plant’s roots.  And roots remain healthy and strong when growing in the right environment.

Containers and patio pots hold the soil and moisture, but the type of material from which they are manufactured can vary the temperature, water retention levels, and evaporation rate – so knowing a bit about the pots’ impact can help you make decisions on what to use for your plants.  You will want to also consider the size, drainage capability, durability, and overall look of the container or pot you select.

Finding a pot to suit your home’s exterior or interior is also a consideration.  There are many styles, colors, and sizes to choose from.  When you select the type to fit your decor, it results in an even more impressive display for your plant combinations.  It all starts with the pots.

Written by Cathy Testa

A Unique Way to Install a Bird House

25 Comments

IMG_9418At my home, my husband and I have started a unique way of installing bird houses which entails the bird house being at a height of 12 feet.  It may take a few hours to get the job done, but the new home is more receptive to the birds because it is at a safe height where they are less vulnerable to potential predators.

So, we wanted to share our process with you.  Here are the materials needed, followed by instructions, and photos (note we are showing two types of houses installed), and a list of plants is included with useful links on more bird information below.

IMG_9366

Materials Needed:

  • 12 ft length of 3/4 inch rigid electrical conduit.  These standard lengths can be found in the electrical department at Home Depot.  (Note: The rigid conduit should come with pre-threaded ends.)
  • 3/4 inch floor flange.  This can be found in the plumbing department at Home Depot.
  • 12-14″ inches of an 8 inch diameter footing tube.  You will need to buy the standard 4 ft length found in the concrete section usually located in the outside area at Home Depot, and cut to 12-14″ long.
  • (1) 80 lb. bag of ‘Quick-Crete’ pre-mix concrete found in the concrete section located in the outside area at Home Depot.
  • Wood screws ½ inch long and ¼ inch diameter
  • Post hole digger tool and power drill
  • 1 very pretty and unique bird house!
Floor Flange

Floor Flange

Let’s Get Started:

1003097_10200588046796250_1420861369_nSelect your bird house location or site.  Think about the exposure, too much shade can be too cold for the birds.  Sunny exposures are great for warmth but if you have a very sunny spot, face the house east or north so it doesn’t get too hot.  You may also want to select a site visible from inside your home or from your favorite outdoor sitting place so you can view them.  But not too close either because baby birds chirping are very loud.  And of course, consider it as a vertical element in your garden bed. The placement is important if you want to use it as a piece of art in your natural landscape along with your beautiful plantings.

Dig the hole with a post hole digger.  Or ask your handsome husband to do so. Insert the footing tube cut to the specified depth (approximately 12 to 14″; see above). Mix the concrete as directed and pour into the footing tube.  Get ready to set the pole (rigid conduit).

IMG_9378Note:  My husband says he doesn’t pay attention to the freeze line because it does not matter if there is a little frost heave as it will only move back in place when the ground thaws.  But the rule is to dig below the frost depth to prevent frost heaving, approximately 42″ down.  If you want to be more cautious, you can dig deeper as per the guidelines for your region.

Set the pole (rigid conduit) in the wet cement.  As noted above, the 12 ft length of 3/4 inch rigid conduit works great. It is strong, very tall, cat proof, and useful for twining plants.  It does sway just a tad in strong winds, but no more than a thick branch might move on a tree.  If needed, use some wood stakes to keep the pole securely in place temporarily until the concrete mix dries completely.  The concrete drying process takes about 8 hours (or that is what we do, is wait a day before attaching the bird house to the pole.)

IMG_9367Attach the floor flange to the base of the birdhouse.  Pretty straight forward, mark the holes with a pencil, drill, and screw.  Takes a few minutes, and a power drill is handy for this. (Note: Pre-drilling pilot holes is helpful and recommended.)

Attach the house to the pole.  Because the rigid conduit used as the pole has pre-threaded ends, just turn the house until it is screwed on firmly. Or turn it to face the direction desired in your landscape.

Watch.  In a day, you should have a bird moving in – we always do!  It’s great.  When we setup the bird house that looks like a Baltimore oriole, we saw a bird move in by the very next day, and this was during October, not in the spring.

IMG_9365

IMG_9369

IMG_9370

IMG_9376

Plants Attracting Birds:

Having a bird house in your yard will definitely entice birds to live there, but other features which help a great deal, are of course, the plants selected to feed or encourage birds. They enjoy plants with edible berries.  They also use natural scrubby bushes around your landscape for protection and as hiding places, especially during the winter for those not migrating southward.  And having a water source, such as a heated bird bath is very helpful.

Heated Bird Bath or Waterer

Heated Bird Bath or Waterer

They visit our heated birdbath all year round, and it is especially nice to see them take drinks from it during the winter when other water sources may be limited.

  • American Beauties offers a website with a bird focus design HERE.  You can narrow your search by your region, exposure of the garden, and soil type.
  • National Wildlife Federation offers information HERE.  You can find out which bird plants are native to your region and see more detailed information about attracting wildlife to your landscape and yard.
  • The Bird & Butterfly Garden at Lockwood Farm in Hamden, CT is a way to see an environment suited for birds in person.  You can find the map of the grounds here and it also includes a list of plants in the garden on page 2.
Thunbergia (black-eyed Susan vine)

Thunbergia (black-eyed Susan vine)

Twining Plants for the Bird House Pole:

In addition to considering plantings around the base of your new bird house, you may want to include a climber, twiner, or vine like plant to grow up the pole.  This will dress up the pole and create a vertical element in your garden, plus I believe the birds like it too.  More foliage and flowers, more natural for them.

Here are some recommendations:

Thunbergia starting to climb early in season

Thunbergia starting to climb early in season

Thunbergia (black-eyed Susan vine), as shown.  It is an annual, but it climbs very quickly.  Mine rose to the top of a bird house pole by mid-summer easily.  The repeat blooms are vivid and the sepals are pretty too.  It gets wider too and fuller.  This plant is tossed by end of season because it is an annual, but it is easy to replace with a starter plant in the spring because they are commonly available in the nurseries.

Mandevilla vine flower

Mandevilla vine flower

Mandevilla vine.  A tropical vine used in the summer, but can be overwintered by storage in a above freezing place over the winter months.  These vines grow quickly and flowers non-stop with large, tubular flowers.  I enjoy watching bees dive into the blooms.  This plant enjoys “full sun” for best performance.  To store them, wait til the first frost of autumn, cut it back, and put the root system in a container of soil or in the original pot if you didn’t plant it in the ground, move it inside the house, basement, or place where it doesn’t get below freezing, preferably between 35-40 degrees Fahrenheit.  By the way, I have a friend who stores their Mandevillas every fall, see the story here at Mandevilla Sightings on my blog.  The pink flowers were amazing this season.

Blackberries

Blackberries

Rubus (blackberry).  This will grow tall canes, but they won’t automatically twine onto the pole on its own.  You may attach the canes to the pole with zip ties (loosely) or garden twine.  We have one under a bird house and ironically, the berries don’t all get eaten by birds!  I think this is because we have lots of bird feeders too. But I have seen turkeys pecking at the leaves and I think they nibble on the lower berries. To read about the type of blackberry we planted, click HERE to see my former post.

Lonicera (honeysuckle vine).  This vine grows any where from 15 to 30 feet, and it may need some assistance to stay attached to a single pole, like the blackberry plant does, but it is a great plant for its flowers and foliage.  It may not be as fast growing as the annual Thunbergia noted above, but the tubular scented flowers are wonderful, and also attracts hummingbirds. This plant can sometimes become too aggressive, but it can be cut back and controlled.  Because it is perennial, you do not need to replant it every season as you do with the Thunbergia or Mandevilla.

Ipomoea (morning glory) or Tropaeolum (nasturtiums).  These are two plants easily grown from seeds.  Both grow rather quickly an have showy flowers, so they must be added to the potentials list for the bird house pole natural decor.  Just grab a packet of seeds in spring, start some in little pots, and transplant to the base of your pole.  The nasturtiums are edible too – by humans I mean.  Sometimes morning glories will self-sow to return on their own.

Miscanthus. Ornamental Grasses are a good choice to put at the  base of the pole as well.  It tends to soften the lines of the upright pole, and sways in the wind.  It seems to fill in that empty space below.  I also like to add decor to the poles in the fall season such as a garland of fake leaves with the orange and yellow colors.  Or you could attach a corn stalk on the pole as we enjoy the pumpkins at that time.

IMG_9375

Other Resources for Vine Plant Lists:

  • Better Homes and Gardens offers a vine list HERE.  Just be careful, some vines are aggressive and trouble-makers in the ground or when directly planted in a garden versus a container garden or patio pot.  Refer to my page called Troublemakers Turned Stars for more information.
  • Plant Facts by the Ohio State University has a nice list with pronunciations you can hear over your speakers.  Geesh, I’ve been mispronouncing Ipomoea for years.  LOL.  Click HERE to hear them out.
  • Birds & Blooms has a top 10 list for backyard vines, click HERE.  Remember, be cautious with some vines that become too aggressive and take over.  You may want to research more information on a vine before you plant it – think Wisteria or English Ivy as examples.  Both grow fast.
  • Fine Gardening has a vine list for full sun to part shade conditions, click HERE.  This magazine has always been one of my favorites because they do a great job of combining the beautify of botany with technical information about plants.

bird on plantAnd remember to check the rate of growth of the vine you select.  You want your vine to climb quickly – especially for our Connecticut season from spring through summer – it can feel short.  For woody or perennial vines, this is not as much of a concern since they will be there year round.

Enjoy your new bird house installation.

Whether you do it this year or in the early spring of next, I’m sure you will have more birds to enjoy in your surroundings for years to come.

Written by Cathy Testa (and co-authored by hubby, Steve!)

http://www.cathytesta.com

860-977-9473 (cell)

 

2013-10-22_0018

Need a Way to Dress Up your Mailbox for the Holidays?

2 Comments
MailWrap by Magnet Works

MailWraps by Magnet Works, Ltd.

Try Magnet Works

My mailbox is kind of shoddy looking and we never got around to getting it renovated to new materials, so when I spotted colorful mailbox covers, called “MailWraps” by Magnet Works, Ltd., I was interested in getting one to disguise my not-so-attractive mailbox – plus the ‘MailWraps’ are very cute and colorful. And there is a wide variety of themes to choose from for each season or holiday.

MailWrap by Magnet Works

MailWraps by Magnet Works

The first one I purchased has an image of a happy snowman on it with bright red colors and birds. Every winter, I take it out of my supply storage to reapply it to my mailbox. It is super easy to attach because they are magnetic and readily stick to the mailbox. But what also surprised me is the fact they last a long time.  They are very durable.

Mine, after a couple years of use, has not torn or faded, so I can attest they are worth the investment.  Additionally, they are reusable every year and can be changed out according to the seasons, which I love.  The only tip I would offer is to just store it carefully in the original plastic wrapper when you remove it until you take it back out again to display.

Winter Theme MailWrap

Winter Theme MailWraps by Magnet Works, Ltd.

The Big E (Eastern States Exposition in Massachusetts) is where I found them originally, so this year, when I returned to check them out again, I got three more ‘MailWraps’ – one for each season: autumn, winter, and spring. And I discovered they offer matching yard signs where you can apply your house number to the sign, so I got a matching pair for the “Falloween” season.

Matching Yard DeSigns by Magnet Works

Matching Yard DeSigns by Magnet Works

SIGNS TO MATCH

Called “Yard DeSigns” by Magnet Works, these are an easy way to display house numbers by your mailbox or at the end of your driveway.  Just peel the numbers off a sheet provided, wet the letters a bit (as instructed in the packet), apply them to the Yard DeSigns sign, and then place on the metal stand (accessory of your choice).  Let it dry! Voila!  You have a new item to dress up your mailbox area and in my case, my plantings around my mailbox too.  The options for accessories include hanging signs or types which attached to a pole as well, so there are choices.

MagnetWorks MailWraps

MagnetWorks MailWraps

Each is removable because they are magnetic, so changing them out for the seasons or holidays is a breeze. When I decided this product is suitable to “combine nature with art,” I visited the Magnet Works website some more to see what else they had to offer. And I was happy to see the theme I purchased this year with a black cat and orange pumpkins at the Big E is a “best seller.”  For some reason, this fact made me happy.

By my Mailbox with Plantings

By my Mailbox with Plantings

Matching box and sign

Matching box and sign

CHANGE FOR THE SEASON

In the winter, I will change both the ‘MailWraps’ on the mailbox and the yard sign, called ‘Yard DeSigns,’ to a holiday theme.  And in the spring, I selected one themed with colorful flowers (of course!).  There is a wide variety of themes to suit every taste, hobby, or style. If you are an animal lover – there are dog themes. Like Birds? They have those too. And there are matching products in addition to the mailbox covers and signs, such as doormats.

Yard DeSign by Magnet Works

Yard DeSign by Magnet Works

HOW IT STARTED

It is always inspiring to hear the story of how a product becomes real and popular, starting with an idea.  When you read the “Our Story” page on Magnet Works website, you will see how a husband and wife team created this decorative concept and figured out a method to make it “stick.”

NEW ART POLES

Upon further clicking here and there on the Magnet Works website, I saw beautiful “Art Poles” by Studio M, a division of their company, which is relatively new.  These poles are decorated with beautiful colors and images. I could easily see Art Poles used in the garden, with a birdhouse on the top or a flag attached to the side.  They are really pretty and colorful. Stephanie Burgess is the artist launching this collection and partnering with Magnet Works. It also includes other artful items such as chalkboards and address plaques.

Image courtsey of Magnet Works/Art Poles by Studio M

Image courtesy of Magnet Works/Art Poles by Studio M

THE ARTISTS

The artists contributing their talents and designs to Magnet Works products are listed under “Our Community” on the Magnet Works website.  Here you can see who created which, and I discovered an artist by the name of Jennifer Brinley is the creator of the autumn “Yard DeSigns” sign which I selected of the cat and pumpkins.  I love her use of the vibrant colors which can be seen from a distance.  And of course, the cat looks similar to my black cat, Mini, so it’s a little personal touch too.

“Jennifer Brinley has become one of the most sought after artists in the home décor and housewares industries. Her distinctive style, strong sense of color and ability to capture current trends has put her in great demand. Painting mostly in gouache and watercolor, Jennifer enjoys using vibrant warm colors inspired by Italian ceramics and French textiles; finding her inspiration through her travels in Europe and the U.S.” (Source: Magnet Works/OurArtists).

As I thought more about the signs and mailbox covers by Magnet Works, I considered how cool it would be if we could custom order our own by uploading photos to have printed on the magnetic covering. Perhaps that will be next on their creations list. I’ll keep checking.

But in the meantime, there are styles for everyone, just browse to find them at www.magnetworks.com. Or visit their Facebook page HERE.

Some of my favorites were these themes below:

SOME OF MY FAVORITE STYLES

Add your Monogram

Add your Monogram

For the Falloween Season

For the Falloween Season

Mittens for the Winter Season

Mittens for the Winter Season

For Turkey Day!

For Turkey Day!

Nice purples for any season

Nice purples for any season

Various ways to display the signs

Various ways to display the signs

Geraniums for Summer

Geraniums for Summer

Another Autumn Theme by Magnet Works, Ltd.

Another Autumn Theme by Magnet Works, Ltd.

Written by Cathy Testa